We have not neglected any steps on the realization of our Frame.
The 4NIX Atom is unique with hydroformed tubes for an even more aggressive look.
A geometry to offer drivers the best stiffness, stability, nervousness ratio on the tracks.
Here are the details that will make the dream of a victory come true:
FRAME: The aluminium alloy used for our frame is 6061, in addition a heat treatment T6 is applied to all the frames in order to improve the mechanical characteristics of the latter (lifetime, stiffness, resistance).Hydroformed tubes for the Top Tube as well as the Down Tube, the saddle tube ( 27,2mm ) when it is evacuated to its base to properly wrap the bottom bracket to have better stability and stiffness!
DIRECTION SOCKET: We studied and realized a lower direction socket in 110mm. This detail will not escape the majority of riders who want to push their pilotages even further (gain in stability on the front of the bike, better start commitment, and especially more effective pushes in the jumps).The socket is made to accommodate a semi-integrated steering set for socket and conical pivot 1''1/8 - 1.5'' ( ZS44/28,6 - ZS56/40 ) to have a better rigor on the front base!
PEDAL CASE: The mounting of the case remains very simple ( BB euro ).Moreover, thanks to a more closed seat tube angle, the 4NIX Atome allows a better transfer of energy from the bottom bracket to the rear wheel.
"DROPOUT" REAR BASES: The rear legs offer you a better setting possibilities.
frames are choice with 2 legs ( 10mm/ 15mm )
BRAKES: IMPORTANT: for the V-Brake system, it is advisable to put on 110 mm long calipers to have an efficiency over the entire adjustment range.
A brake tab with Dics 4NIX is available disc 160mm only
KIT DECORATIONS : You have the possibility to make your own frame color + decoration by a simple request by EMAIL ( after ordering ).